New Holland 200 Series Service Manual page 25

(9) SELF LEVELING SWITCH
If equipped, use this switch to activate the
self leveling feature.
(10) AUXILIARY HYDRAULIC SWITCH
Push the switch to the upper (HF) position
to engage the high flow auxiliary hydraulic
mode that produces 207 bar (3000 psi).
Push the switch into the lower (HP) position
to engage the enhanced high flow mode
to produce 276 bar (4000 psi) if equipped
with approved attachment. The lamp will
illuminate when activated. Keep the switch
in the neutral position to disable high flow.
(11) AUXILIARY ELECTRIC SWITCH #2
If equipped, this switch is for the front
electric connector.
(12) LOADER LOCKOUT
If equipped, push to disable loader control
while roading the unit. The bucket and
loader arm will be locked in the position
they are in when the loader lockout switch is
pressed to the ON position. This prevents
the operator from inadvertently lowering or
raising the loader arm or bucket while driving
the machine on roads. NOTE: A mechanical
machine with the loader lockout activated
will result in DTC 4952 being displayed
along with an amber lamp and buzzer. The
auxiliary override button (lower left) on the
instrument cluster can be pressed to clear
the display and silence the buzzer. The
amber lamp will remain illuminated.
(13) WINDSHIELD WIPER SWITCH
If equipped, this three position switch turns
the wiper ON/OFF and operates the washer
fluid spray.
(14) BLANK
This location is left open for any options you
may add in the future.
(15) 12 V POWER PORT
Supplies 12 V of power for accessories.
INTRODUCTION
47712044 29/04/2014
19
2
RAPH12SSL0031DA