Manual Ip Address Assignment - Axis 5570e User Manual

AXIS 5570e and AXIS 5670e User's Guide

Manual IP address assignment

To establish communication with the TCP/IP network, an IP Address must be assigned to your AXIS
5570e/AXIS 5670e. Choose the appropriate method according to your network:
• AXIS IP JumpStarter™ software is an easy-to-use Windows application that allows you to
assign an IP address to your print server and find print servers already installed in your
network.
Refer to Setting the IP address manually using AXIS IP JumpStarter, on page 16
• ARP/Ping - use this method to set the IP address for each new print server individually.
This method cannot be used over routers.
Refer to Setting the IP address manually using ARP/Ping, on page 17.
• AXIS ThinWizard™ software is the primary recommended tool for large organizations.
It can set IP addresses, discover and group print servers, install new firmware and
configure multiple Axis products concurrently.
Refer to Print Server Management using AXIS ThinWizard, on page 58
Note:
If you are using host names, you can map a unique host name to the IP address. Refer to your system manuals
for instructions on how this is performed on your system.
15
.