Axis 5570e User Manual page 50

50
5. Use the NetWare Administrator to create the printer, print server and queue objects in the
NDS tree and then link them together. The Print Services Quick Setup (Non-NDPS) utility can
be used for this. Go to Tools in the NetWare Administrator.
6. Use the Add Printer Wizard on your work station to install the printer on your client. Note
that only NDS queue based PSERVER printing is supported. When installing, choose Network
Printer and browse to the queue you have just created. Alternatively, choose Local Printer
and select the queue you have just captured.
Any configuration and management of the AXIS 5570e/AXIS 5670e can be performed from any
standard Web browser. Please refer to Print Server Management using the built-in Web pages, on
page 57.
If both the IPX and IP protocols are enabled in your network and the print server uses
DUAL_STACK (enabled by default) as its network transport protocol, then IPX will be chosen. To
force the print server to use the IP transport protocol, go to your print server's web interface and
choose Admin | Detailed View | NetWare and change the NetWare Transport Protocol from
DUAL_STACK to IP_ONLY. Save and exit when finished.
Note:
Pure IP requires that you run NetWare 5 or higher.
AXIS 5570e and AXIS 5670e User's Guide