Axis 5570e User Manual page 8

8
Printer Ports
AXIS 5570e is equipped with one USB port that is USB 1.1 and 2.0 low and full speed compliant,
and one high-speed IEEE 1284 compatible parallel port
AXIS 5670e is equipped with two high-speed IEEE 1284 compatible parallel ports and one RS232
serial port.
Test Button
The test button is used for:
• printing a test page to check the connection to the printer
• printing the parameter list showing the print server settings
• performing a Factory Default of the print server, which will restore all parameters and set-
tings to their factory default values.
Network Connector
The AXIS 5570e/AXIS 5670e are designed for 10baseT Ethernet or 100base TX Fast Ethernet
networks and is connected to the network via a standard RJ-45 (Category 5 twisted pair) cable.
Network Indicator
The network indicator flashes to indicate network activity.
Power Indicator
The power indicator is lit while power is applied. If it is not lit, or if it flashes, there is a problem
with the print server or its Power Adapter.
Configuration and Management
The print server can be configured and managed from its internal Web pages, using HTTP as well
as HTTPS in the secure mode. The print server's internal Web pages offer you a platform
independent management tool that is suitable for all supported network environments.
AXIS 5570e and AXIS 5670e User's Guide