AXIS 5570e and AXIS 5670e User's Guide
Public Access Printers
Follow these instructions to create a public access printer using the NDPS Manager object in your
NetWare administrator utility:
1. Double-click on the NDPS Manager object you will be using to control the Printer Agents.
2. On the Identification page for the NDPS Manager, click the Printer Agent List button. The
Printer Agent List dialog will appear.
3. Click New. The Create Printer Agent dialog will appear.
4. Type a name of your choice in the Printer Agent Name field.
5. Select the Axis Gateway configuration in the Gateway Type window.
6. Click OK
7. In the Select the printer's type window, choose your printer. If you cannot find the printer,
select an appropriate Generic one (PCL, PS, etc.)
8. Select TCP/IP (default) or IPX as network protocol.
9. Click Next.
10. You will find the print server in the next window with the printer attached on the connected
port.
Depending on the transport protocol you used when you start the installation, the print server
should appear as following:
TCP/IP Network protocol:
IP Address and Port, e.g.: 192.168.70.243 and LPT1
Only the ports with a connected printer show up in this window. If the printer is not in the dis-
played print list, click Manually specify the print server and proceed with these steps:
11. Enter the Print Servers' IP address in the IP Address Field
45