Axis 5570e User Manual page 46

46
12. Choose a port in the Print Server Port field, e.g. LPT1.
The available ports are LPT1, LPT2, USB1 and COM1
IPX Network protocol:
All the available ports will be presented, regardless if the printers are or not connected to
those ports, e.g.
LPT1
LPT2
USB1
COM1
The IPX Addresses for the above printers will appear as:
<IPX External Network Number>:<Print Server's HW address>:<Socket Number>
i.e.: 01d7e1c2:00408c5ff6a6:400c
where 400c, 401c, and 402c are the socket numbers corresponding the LPT1, LPT2, USB1 and
COM1 physical ports:
LPT1
LPT2
USB1
COM1
13. If the printer is not in the displayed print list, click Manually specify the print server and
then:
- Enter the <IPX External Network Number> in the Network field.
- Enter the <Print Server's HW address> in the LAN HW address field.
14. Choose a port in the Print Server Port field, e.g. LPT1
The valid values for the port numbers are LPT1, LPT2, USB1 and COM.
15. Click Finish. Next, select the printer drivers for each client operating system. (Windows XP,
Windows 2000, Windows NT4 and Windows 98). These drivers will be automatically
downloaded to users' workstations when they install this printer in the future.
16. Click Continue and OK in the next NDPS window. The new Printer Agent appears in the
Printer Agent List window. Check the Status: it should be Idle.
17. Press Cancel to close the NDPS Manager
AXIS5FF66A_P1
AXIS5FF66A_P2
AXIS5FF66A_P2
AXIS5FF66A_P3
400c
401c
401c
402c
AXIS 5570e and AXIS 5670e User's Guide