Axis 5570e User Manual page 43

AXIS 5570e and AXIS 5670e User's Guide
3. The Wizard asks you to select My Computer or Network printer server. Select My Computer,
click Next.
4. Click Add Port... In the Available Ports dialog, select AXIS Port and click New Port...
5. Select LPR (TCP/IP) as your choice of protocol and click OK.
6. Enter the IP address or the host name of your print server (Example IP address: 192.168.3.191
or host name: AXIS181636).
In the Logical Printer Name field, enter the port you wish to use; USB1, LPT1, LPT2 or COM1.
Click OK, click Close. Select Manufacturer, Printers, choose a printer name and if you want to
use the printer as your default printer. Choose if you want to share the printer and print a test
page. Click Finish.
7. You may now configure the port, as described below. The Axis Printer Port is now installed.
Configure the Port:
1. Select Settings | Printers from the Start menu and highlight the printer you wish to
configure. Select File | Properties | Ports and click Configure Port.
2. Choose whether error condition pop-up messages are to be displayed by checking the box in
the Configure AXIS Ports dialog. Define the frequency at which the error messages should be
displayed after retry. Click OK.
Note:
Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the print driver
provided with the printer. This assures you of the latest driver software.
43