Advance Mode - Operation - Lopi Deerfield Manual

Advance Mode - Operation

Manual or Thermostat
To switch between modes, press the Thermostat Button.
Manual Mode
Manual Mode requires the user to turn the
heater on and off manually and select the heat
output setting. When in Manual Mode the
Thermostat Button will not be lit.
Manual Mode
Manual mode requires the user to turn the heater on and off manually and select the heat output setting.
To Start
Press the On/Off Button to start and stop the heater. The
heater will begin the start-up process which can take
approximately 20 minutes.
-
The On/Off Button will transition to GREEN.
Manual Mode - Adjusting the Heat Setting
Use the Heat Setting slider to adjust the heat
output.
© Travis Industries
Operation
Thermostat Mode
Thermostat (T-Stat) Mode allows you to use a thermostat
to control room temperature. When in Thermostat Mode
the Thermostat Button will display a green light.
To Shut Down
Press the On/Off button on the control panel. The
heater will begin the shut-down process, which
takes approximately 45 minutes.
-
The On/Off Button will transition to RED.
Heat Setting
12/18/20 - 1550
31
Deerfield Stove