Lopi Deerfield Manual page 5

Allow the appliance to cool
completely before carrying out any
maintenance or cleaning.
Do not operate the heater if the
flame becomes dark and sooty or if
the burn platform overfills with
pellets. Press the "STOP" button
and periodically inspect the heater.
The heater will not operate during a
power outage.
Keep foreign objects out of the
hopper.
Your heater requires periodic
maintenance and cleaning (see
"Heater Maintenance"). Failure to
maintain your heater may lead to
accumulation of soot, creosote, and
ash, and smoke spillage or fire in
your home.
© Travis Industries
Safety Precautions
12/18/20 - 1550
Maintain the door and glass seal
and keep them in good condition.
Do not operate this heater with
broken or missing glass.
Do not slam the door or strike the
glass.
Notify your dealer to replace the
glass if the glass on this appliance
is broken or damaged.
Do not place clothing or other
flammable items on or near this
appliance.
This heater must be connected to a
standard115 V., 60 Hz grounded
electrical outlet. Do not use an
adapter plug or sever the grounding
plug. Do not route the electrical cord
underneath, in front of, or over the
heater.
The exhaust system must be
completely airtight and properly
installed. The pellet vent joints must
be sealed with RTV 500 F. (260 C.)
silicone sealant.
When installed in a mobile home,
the heater must be bolted to the
floor, have outside air, and NOT BE
INSTALLED IN THE BEDROOM
(per H.U.D. requirements). Check
with local building officials.
Deerfield Stove
5