Table of Contents
Advertisement
Threading 4 thread cover stitch
2. Cover stitch R needle (pink) markings
R
Place the spool on the spool holder pin as illustrated.
(1) Bring the thread up from the spool and lay it from the back to the
front into the guide.
(2) Thread the first machine guide.
(3) Slip the thread through the groove.
(4,5) Take the thread under the thread guide plate and through the
1
take up.
(6) Thread the guide.
2
(7,8) Thread the guide on the needle clamp.
(9) Thread the right needle from front to back.
(10) Place the thread underneath the presser foot.
2 2
Lower presser foot.
5
3
When threading is complete, close the looper cover.
4
Note:
6 6
If the looper has to be re-threaded, cut the needle threads off at the
7
needle and remove surplus thread from below. Thread the looper
8
and then re-thread the needles.
9
6
7
8
9
35
Advertisement
Table of Contents
