Thread Stand; Placing The Spool Holder For The Chain Thread - JUKI MO-735N Instruction Manual

Preparing the machine / Using the machine

Thread stand

Push the support rod firmly into the socket on the back of the ma-
chine.
C
D
Raise the support rod (C) fully, turning slightly until the position
catches engage. Position the thread guide (D) on the thread stand
so that the arrow is to the front.
A

Placing the spool holder for the chain thread

Lift the foam pad (A), slide the guide tabs (C) of the spool holder (B)
D into the guide of the upper side of the spool holder from left to right
C
into position (E) and press until tab (D) clicks into the underside of
rib. (F)
F E
B
C
D
E
F
8