Table of Contents
Advertisement
Maintenance
WARNING :
Please refer to the safety instructions.
Changing the upper knife
The upper knife (moving knife) is made from special hardened ma-
terial.
Replace the upper knife only when the knife blade tip is damaged.
For a replacement, contact your local dealer.
Changing the lower knife
Main switch on "O". Disconnect machine from electri-
city supply.
Turn handwheel towards you until needles are fully raised. Match
the matching up marks on hand wheel and side cover.
Raise the upper knife.
Loosen the setscrew on the lower knife retaining plate. Remove the
lower knife. Fit the replacement knife (from accessory bag) in the
groove so that the sharp edge is in line with the stitch plate.
Re-tighten the setscrew.
Cleaning and lubricating
Main switch on "O". Disconnect machine from electri-
city supply.
During sewing, dust and fluff collect in and on the machine. This
should be removed regularly. Your overlock machine requires very
little lubrication. Now and then, lubricate only the points illustrated.
Please refer to safety instructions on page 1.
Precautions to be taken when handling oil
* In the event the oil gets in the eye or adheres on skin,
immediately wash it off in order to prevent irritation and
rash.
* If swallowed accidentally, immediately seek for medical
advice in order to prevent diarrhea and vomiting.
* Keep the oil away from children.
* Oil disposal is obliged by legislation. Dispose of the oil
properly in compliance with the relevant legislation.
47
Advertisement
Table of Contents
