Lucent Technologies Definity 8405 User Manual page 8

5 Call appearances/
feature buttons
Handset
Handset jack
Hold button
(On some 8405 voice
terminals, this can be used
as a Hold/Ring button)
Line jack
(on back of voice terminal)
Message light
Mute button
Ring button
Shift button
At least two of these 5 buttons are devoted to incoming and
outgoing calls (call appearances) and are labeled
with an extension number; the remaining buttons access
features (feature buttons) and are labeled with a feature
name. Each has a red light telling you this is the line you
are using or this is the line you will get when you lift your
handset. The green status light next to each call appearance
and feature button tells you the line or feature is being used.
A handset is provided for placing and receiving calls. (The
handset is also known as the receiver.) In most cases, you
must lift the handset (go off-hook) or activate the speaker
before you can use a feature.
This jack is for connecting a handset to your voice terminal.
The jack is labeled
A red button for putting a call on hold.
If your 8405 has a
then to select a personalized ring for your voice
Hold
terminal from eight possible ringing patterns.
This jack is used for connecting a line cord to your voice
terminal. The jack is labeled "LINE."
A red light which goes on steadily when a message has been
left for you. This light may be labeled Message or
For turning off the microphone associated with the handset
(on all 8405 terminals) or the built-in speakerphone
microphone (on the 8405B Plus and 8405D Plus) so the
other person on the call cannot hear you.
If your 8405 has a
select a personalized ringing pattern from eight possible
ringing patterns.
A blue button on some 8405 voice terminals which can be
used to access two additional features: (When
active, the red light next to the button is on.)
When used with
ring from among eight available patterns.
When used with
8405D Plus voice terminals), you can perform an
acoustic test of the environment and adjust the
speakerphone to the surrounding acoustic environment
for optimal performance.
.
Shift button, you can press
Ring button, you can use this button to
, you can select a personalized
Hold
(on some 8405B Plus and
Speaker
Shift and
.
is
Shift
4