Normal (Exit); Stored Number - Lucent Technologies Definity 8405 User Manual

Normal (Exit)

To exit any display
feature and return to
Normal (call-handling)
mode display

Stored Number

You can access this feature with the softkeys only if your voice terminal has a
display and if the feature's abbreviation, View, appears on the second line of one of
the feature option screens.
To view a number stored
on an AD button
To see the number stored
as a list item
1
Press Exit
Display will show call information for the active
call appearance
1
Press Menu and then press the softkey below View
or, if View is not available on your display,
press Stored
2
Press the selected
Stored number is shown
3
To return to the Normal (call-handling) Mode display,
press or repeat Step 2 to see another stored
Exit
number
1
Press and then press the softkey below View
Menu
or Press
Stored
2
Press the selected
or Dial the appropriate AD List code:
List 1 __________
List 2 __________
List 3 __________
Note: An
Enhcd List
see your system manager.
3
Dial the selected list item (1, 2, 3...)
Stored number is shown
4
Hang up
5
To return to the Normal (call-handling) Mode display,
press Exit or begin again at Step 2 to see another
stored number
AD xxxxx
Pers List Grp List
or
may also be available;
or Sys List
47