Message; Mute - Lucent Technologies Definity 8405 User Manual

To cancel a Leave Word
Calling message
Note: You cannot cancel
a message left for an
AUDIX subscriber.

Message

To retrieve a message
when your Message light
is on

Mute

Note: If you are using an 8405B or 8405D, the Mute feature affects the microphone
associated with the handset only. If you are using an 8405B Plus or 8405D Plus, the
Mute feature mutes the handset when you are talking on the handset and mutes the
speakerphone microphone when you are using the built-in speakerphone.
To prevent the other
party from hearing you
(To mute the handset
or speakerphone
microphone)
1
If you are using an 8405 with a display, press
and then press the softkey below CnLWC
(while on-hook or off-hook)
If your 8405 does not have a display or if CnLWC is
not available on your display, press
(while on-hook or off-hook)
or Dial the Leave Word Calling cancel code
__________ (while off-hook)
2
Dial the extension
Note: If reorder tone is heard, message is not
canceled; try again.
1
If your set has a display, see the Message Retrieval
procedures under the Display Features
Procedures heading. Otherwise, see your system
manager for instructions regarding your local
message retrieval procedures
1
Press Mute
Red light next to
party cannot hear you
2
When you are ready to resume conversation with the
other party, press
Red light next to
party can hear you again
Note: When the voice terminal is set for the Speaker
(listen-only) feature, the light next to
whenever you are using the speaker.
The Mute feature turns off automatically when you
hang up, or switch from the speakerphone to the
handset or from the handset to the speakerphone.
Cancel LWC
[confirmation tone]
Mute goes on and the other
again
Mute
Mute goes off and the other
Mute
Menu
[dial tone]
goes on
32