Using The Display, Softkeys And Display Control Buttons; Entering Softkey Mode And Viewing The Three Feature Option Screens - Lucent Technologies Definity 8405 User Manual

Using the Display, Softkeys and Display
If you are using an 8405D or 8405D Plus voice terminal, the following information
will help you use the display, the softkeys, and the display control buttons.
The softkeys are the four keys labeled with arrows (
the display. The four display control buttons, labeled
and Next are located under the softkeys. Figure 5 shows the location of the
softkeys in relation to the display above the softkeys and the display control buttons
below them.
Figure 5. The Display, Softkeys, and Display Control Buttons

Entering Softkey Mode and Viewing the Three Feature Option Screens

There are three separate feature option screens. Each of these screens allows you to
select from four different features.
You can enter Softkey Mode by pressing the display option button labeled
The following is an example of a feature option screen.
The top line of each feature option screen shows you the status of each of the four
features. An arrow appears above the feature name or abbreviation if that feature is
active. If there is no arrow above the feature, the feature is not active. In the above
example, the Automatic Callback feature is active because there is an arrow above
that feature abbreviation.
Note: If the feature requires you to dial a telephone number or extension, such as
Call Forwarding, you will temporarily see the digits you are dialing, rather than the
arrow, above the feature name.
Control Buttons
Menu Exit Prev
LWC CnLWC AutCB Timer
) located directly below
,
Menu
Display
Softkeys
Next
Display control buttons
,
Exit
Prev ,
Menu .
13