Answering And Placing A Call - AT&T Definity 8102 User Manual

The following features can be used no matter which communications system your 8102
or 8110 telephone is connected to. Remember that you can use the Speakerphone and
Mute features only if you are using an 8110 telephone. Some 8110 users will also be
able to use the Auto Answer feature.

Answering and Placing a Call

Note: If you are using the 8110 telephone, you can place and answer calls either by
going off-hook (by lifting the handset) or leaving the handset on-hook and by
pressing [ ]. Pressing [
SPKR
that you can place and answer calls without lifting the handset.
If you are using the 8102 telephone, you can connect an external speakerphone to the
speakerphone/headset jack on the rear of your telephone. For procedures on
answering and placing calls with the adjunct speakerphone, refer to the instructions
that came with the equipment.
To answer a call
To answer a call using
the speakerphone (for
8110 users)
To place a call
To place a call using
the speakerphone (for
8110 users)
To end a call
Phone Features
] simultaneously activates the built-in microphone so
SPKR
1 Pick up handset
Speak to other party
2
1 When you hear the telephone ring, press [
Red light next to [
2
Speak to other party
1 Pickup handset
2 Dial desired number
1 While on-hook, press [
Red light next to [
2 Dial desired number
1 Hang up handset
o r
if you are using the speakerphone, press [
Red light next to [
] goes on
SPKR
]
SPKR
] goes on
SPKR
] goes off
SPKR
]
SPKR
[dial tone]
[dial tone]
]
SPKR
9