Abbreviated Dialing (Ad) - AT&T Definity 8102 User Manual

Since your 8102 or 8110 telephone is connected to a DEFINITY Generic 2 or System 85
communications system, you may be able to use any of the following features. Check
with your System Manager to see which of these features have been assigned to your
telephone.
Special InstructIons
The first time you use these procedures, you will need to customize them for yourself
by following the directions below. Your System Manager can supply the information
required.
To the right of each feature name is a box. For each feature that you have, mark a
[ ] in the blank box as a reminder. There is already a check in the box beside the
Conference, Hold, and Transfer features.
You can activate or cancel most of the features by dialing 2- or 3-digit code. In the
blanks provided within the procedures, write in the assigned feature code numbers.
Note: You can store these feature codes on Programmable Dialing buttons
(including [
FLASH

Abbreviated Dialing (AD)

Note: Both the 8102 and the 8110 telephones have 12 Programmable Dialing buttons
on which you can store telephone numbers or access codes. In addition, DEFINITY
Generic 2 and System 85 allow you to store numbers in a maximum of 3 Abbreviated
Dialing lists.
To program or
reprogram an outside
number, extension, or
feature code into a
personal list
Switch Features
]).
1
On a separate sheet of paper, jot down the outside
numbers, extensions, and feature codes you want to
program as items on your personal list (see example to
the left)
Note: Each telephone number or feature code is stored
as a separate list item.
2 Dial Abbreviated Dialing program code (while off-hook)
Dial personal list code
3
4 Dial desired list item number (for example, 09, 01-95,
and so on, depending on list size)
5 Dial outside number, extension, or feature code you
want to store
[confirmation tone]
[dial tone]
18