Removing The Control Unit; Removing The Electrical Controls - APRILIA QUASAR 125 2003 Workshop Manual

CYCLE PARTS
1
1
2
6
- 14 -
00

6.1.11 REMOVING THE CONTROL UNIT

Carefully read see 1.3 (GENERAL SAFETY RULES).
"
Turn main switch to "
"
Disconnect control unit (1) connectors.
At reassembly, make sure that connectors are properly coupled.
"
To remove control unit (2), slide it out of frame.
2

6.1.12 REMOVING THE ELECTRICAL CONTROLS

Carefully read see 1.3 (GENERAL SAFETY RULES).
"
Turn main switch to "
"
Disconnect the three electrical connectors (1).
"
Loosen and remove the two screws (2).
"
Remove the two shells.
".
".
QUASAR 125-180
Release 00/2003 - 09