TUONO R_FACTORY
Fuses
AUXILIARY FUSES
•
A - From key to: light relay, stop, horn,
tail lights (5A).
•
B - From key to: turn indicators, instru-
ment panel (5A).
•
C - From battery to: permanent power
supply positive to ECU (5A).
•
D - From battery to: speed sensor, fuel
pump, relay, starter, lambda probe
(15A).
•
E - From battery to: electric fan relay,
coils, injectors, air intake flaps, cam-
shaft position sensor (15A).
•
F - From ignition switch to: high-beam
lights, low-beam lights (20A).
There are three spare fuses (G).
MAIN FUSES
•
H - Battery recharge and vehicle loads
(red and red/white cables) + immobil-
izer (30A).
•
I - Injection load (red and red/black ca-
bles) (30A).
There is one spare fuse.
Control unit
Engine control unit pinout
CONNECTOR A
1. Rear cylinder coil control - Signal type: Power output
2. n.c
3. Barometric pressure sensor power supply (5V) - Signal type: Fuel supply
4. Barometric pressure sensor power supply (ground) - Signal type: Fuel supply
5. Revolution sensor signal - signal type: Frequency input
6. n.c.
7. Air temperature sensor signal - signal type: Analogue input
Electrical system
ELE SYS - 65