Omron Ateg H3DT Series Manual page 4

Datenblatt
Zeitrelais H3DT
H3DT
Specifications
Time Ranges
Time range setting
Set time range
Scale numbers
Ratings
Power supply voltage *1
Allowable voltage fluctuation
range
Power reset
Reset voltage
Voltage input
H3DT-N2/-L2
*3
Power
consumption
H3DT-N1/-L1
Rated Insulation Voltage
Control output
Ambient operating
temperature
Storage temperature
Surrounding air operating
humidity
Erstellt am 09.10.2020 um 23:38 Uhr | Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten!
|
ATEG Automation GmbH Intzestraße 50
0.1 s 1 s 10 s
0.1 to 1.2 s 1 to 12 s 10 to 120 s
24 to 240 VAC/DC, 50/60 Hz *2
85% to 110% of rated voltage
Minimum power-OFF time: 0.1 s
10% of rated voltage
24 to 240 VAC/DC
High level: 20.4 to 264 VAC/DC, Low level: 0 to 2.4 VAC/DC
At 240 VAC: 2.3 VA max., at 240 VDC: 1.0 W max.,
at 24 VDC: 0.3 W max.
At 240 VAC: 2.0 VA max., at 240 VDC: 0.9 W max.,
at 24 VDC: 0.3 W max.
250 VAC
Contact output: 5 A at 250 VAC with resistive load (cos = 1),
5 A at 30 VDC with resistive load *5,
0.15 A max. at 125 VDC with resistive load,
0.1A max. at 125 VDC with L/R of 7 ms.
The minimum applicable load is 10 mA at 5 VDC (P reference value).
Contact materials : Ag-alloy + Gold plating
(Recommended fuse: BLN5 (Littelfuse) or 0216005MXEP)
20 to 60C (with no icing)
40 to 70C (with no icing)
25% to 85%
| |
42859 Remscheid Germany
1 min 10 min 1 h
1 to 12 min 10 to 120 min 1 to 12 h
12
*1. When using a 24-VDC power supply voltage,
there will be an inrush current of approximately
0.5 A. Allow for this inrush current when
turning ON and OFF the power supply to the
Timer with device with a solid-state output,
such as a sensor.
*2. DC ripple: 20% max.
*3. The power consumption is for after the Timer
times out in mode F2 for the H3DT-N and
mode A for the H3DT-L.
The maximum power consumption is given,
including the current consumed by the input
circuit.
|
Tel.: +49 (0)2191 / 591457-0
H3DT-N/H3DT-L
10 h 100 h
10 to 120 h 100 to 1,200 h
3
Seite 4 von 37
| | www.ateg.de
info@ateg.de