Omron Ateg H3DT Series Manual page 3

Datenblatt
Zeitrelais H3DT
H3DT
Multi-range, Multi-mode Timer
H3DT-N/H3DT-L
• Multiple time ranges and operating modes let you cover a wide
range of applications.
• The time-limit DPDT output contacts can be changed to time-
limit SPDT and instantaneous SPDT output contacts using a
switch.
• Sequence checks are easily performed by setting an
instantaneous output to 0.
• Start signal control for some operating modes.
Ordering Information
List of Models
Supply voltage
24 to 240 VAC/DC
Model Structure
Model
A2: ON Delay (Power ON Delay)
B3: Flicker OFF Start (Power ON Start)
H3DT-N2
B4: Flicker ON Start (Power ON Start)
D: Signal OFF Delay
E2: Interval (Power ON Start)
E3: Signal OFF Interval
H3DT-N1
F2: Cumulative (ON Delay)
F3: Cumulative (Interval)
A: ON Delay (Signal ON Delay)
B: Flicker OFF Start (Signal Start)
H3DT-L2
B2: Flicker ON Start (Signal Start)
C: Signal ON/OFF Delay
E: Interval (Signal Start)
G: Signal ON/OFF Delay
H3DT-L1
J: One-shot Output (Signal Start)
J2: One-shot Output (Power ON Start)
* Certification is pending for DNV GL.
2
Erstellt am 09.10.2020 um 23:38 Uhr | Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten!
|
ATEG Automation GmbH Intzestraße 50
Control output
Contact output, DPDT (time-limit DPDT, or time-
limit SPDT + instantaneous SPDT)
Changed using a switch.
Contact output, SPDT (time-limit SPDT)
Operating modes Terminal block
10 terminals
8 terminals
10 terminals
8 terminals
|
42859 Remscheid
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
H3DT-N/H3DT-L
Standard Eight-mode Timer
H3DT-N2
Model
H3DT-N1
Mounting
Input type Output type
method
Relay, DPDT
Relay, SPDT
DIN Track
Voltage input
mounting
Relay, DPDT
Relay, SPDT
| |
Germany Tel.: +49 (0)2191 / 591457-0
*
LR
* CSA conformance evaluation by UL.
Expansion Eight-mode Timer
H3DT-L2
H3DT-L1
Safety standards
cULus
(UL 508 CSA C22.2 No.14)
CCC
LR
DNV GL *
EN 61812-1
IEC 60664-1 4 kV/2
Seite 3 von 37
| | www.ateg.de
info@ateg.de