Omron H3DS Series Manual
  1. Manuals
  2. Brands
  3. Omron Manuals
  4. Timer
  5. H3DS Series
  6. Manual

Omron H3DS Series Manual

Solid-state multi-functional timer
Hide thumbs Also See for H3DS Series:
Table of Contents

Advertisement

Quick Links

Przekaêniki czasowe H3DS
Małe rozmiary – wielkie możliwości

Advertisement

Table of Contents
loading

Related Manuals for Omron H3DS Series

Summary of Contents for Omron H3DS Series

  • Page 1 Przekaêniki czasowe H3DS Małe rozmiary – wielkie możliwości...
  • Page 2 H3DS mo×e być równie× w wersji z nowatorskim systemem zacisków spr∏×ynowych, zapewniajàcych szybkie i pewne połàczenia. Cechy zwi∏kszajàce funkcjonalnoÊć przekaênika w 17.5mm obudowie Przy projektowaniu produktów OMRON-a szczególnà uwag∏ Grupa przekaêników czasowych H3DS zwraca si∏ stale na ich maksymalnà miniaturyzacj∏. H3DS, • Dwa typy przekaêników wielofunkcyjnych w obudowie o szerokoÊci tylko 17.5mm, jest idealny do sto-...
  • Page 3 Podłàczanie przekaê- • Umo×liwia podłàczanie podwójnych ników czasowych mo×e być szczególnie czasochłonne podczas seryjnej pro- przewodów dukcji układów sterowania. OMRON opracował zaawansowany technicznie • Łatwe dołàczanie przewodów – układ zacisków na przewody, który umo×liwia skrócenie czasu ich podłàcza- w 3 krokach nia o ponad 50%.
  • Page 4 TRYBY PRACY PRZEBIEGI CZASOWE PODŁÑCZENIA ZACISKÓW H3DS-AL/ALC Power opóênienie wyłàczenia Signal* (wykres A) Output taktowanie z opóênieniem Power Signal* Output H3DS-XL/XLC taktowanie bez opóênienia Power Signal* (wykres A) Output Power przesuni∏cie sygnału Signal* Output Power H3DS-SL/SLC opóênione wyłàczenie Signal* (wykresy A, B2, E i J) sygnałem Output Power...
  • Page 5 Przekaêniki czasowe H3DS WIELONAPI¢CIOWE ZACISKI SPR¢þYNOWE • 24-230VAC i 24-48VDC w jednym modelu • wszystkie modele tak×e w wersjach • wszystkie standardowe napi∏cia zasilania z zaciskami spr∏×ynowymi • napi∏cie zasilajàce na dwóch zaciskach • szybki monta× w trzech krokach • prawie wszystkie zaciski dublowane co Zalety pozwala na łàczenie do innego urzàdzenia •...

  • Page 6: Ordering Information

    Solid-state Multi-functional Timer H3DS-M/-S/-A Eight operating modes (H3DS-M) and four operating modes (H3DS-S) cover a wide range of applications. A wide time setting range of 0.10 s to 120 h. Two LEDs indicate power and relay status respectively. Ordering Information Model Supply voltage Supp y o age...

  • Page 7: Specifications

    H3DS-M/-S/-A H3DS-M/-S/-A Specifications General Item H3DS-MLj H3DS-SLj H3DS-ALj Operating mode A: ON-delay (Signal or Power) A: ON-delay A: ON-delay (fixed) B: Flicker OFF start (Signal or Power) B2: Flicker ON start B2: Flicker ON start (Signal or Power) E: Interval C: Signal ON/OFF-delay J: One-shot D: Signal OFF-delay...
  • Page 8 H3DS-M/-S/-A H3DS-M/-S/-A 3. The power consumption is for mode A after the Timer counts the time-up time and for the AC input at 50 Hz. The power consumption of the H3DS-ML includes the input circuit with the B1 and A1 terminals short-circuited. Characteristics Accuracy of operating 1% max.
  • Page 9 H3DS-M/-S/-A H3DS-M/-S/-A Nomenclature H3DS-MLj/-SLj H3DS-MLC/-SLC Wire connection holes Output indicator (orange) (Lit while Timer output is ON.) Time setting dial (set time) Set time window Lock for time setting dial Time scale display window and selector (select one from 1 s, Lock for time scale selector Release holes 0.1 s, 1 h, 0.1 h, 10 h, 1 h, 1 m,...

  • Page 10: Operation

    H3DS-M/-S/-A H3DS-M/-S/-A Operation Block Diagram H3DS-MLj Zero setting Time scale/ Operating AC (DC) input detection unit selectors mode selector circuit Oscillation Power supply Counting Output circuit circuit circuit circuit Indicator Input circuit Start input circuit Power-ON Output indicator indicator H3DS-SLj/-ALj Zero setting Time scale/ Operating...

  • Page 11: Basic Operation

    H3DS-M/-S/-A H3DS-M/-S/-A Basic Operation Setting of Selector The selectors can be turned clockwise and counterclockwise to se- lect the desired time scale, or operating mode. Each selector has a snap mechanism that secures the selector at a given position. Set the selector at a position at which it is secured. Do not set it midway between two securing positions or a malfunc- tion could result from improper setting.

  • Page 12: Timing Chart

    H3DS-M/-S/-A H3DS-M/-S/-A Timing Chart Note: 1. The minimum power reset time is 0.1 s and the minimum signal input time is 0.05 s. 2. The letter “t” in the timing charts stands for the set time and “t–a” means that the period is less than the time set. Operating Timing chart mode...
  • Page 13 H3DS-M/-S/-A H3DS-M/-S/-A Operating Timing chart mode t–a t–a t–a Signal OFF-delay Power (A and A Basic operation Start (B and A (see note) Power Output relay: NC 15 and 16 Start Output relay: NO (output indicator) Output 15 and 18 Start input is valid and re-triggerable while the Timer is in operation.

  • Page 14: Installation

    H3DS-M/-S/-A H3DS-M/-S/-A Dimensions Note: All units are in millimeters unless otherwise indicated. H3DS-ML/-SL/-AL Surface color: Light gray 5Y7/1 (OMRON) H3DS-MLC/-SLC/-ALC 17.5 Installation Terminal Arrangement H3DS-MLC H3DS-ML H3DS-SLC/-ALC H3DS-SL/-AL (see note 1) (see note 1) Note: 1. DC supply voltage does not require the designation of polarity.

  • Page 15: Input Connections

    H3DS-M/-S/-A H3DS-M/-S/-A Input Connections The inputs of the H3DS-MLj are voltage (voltage imposition or open) inputs. No-contact Input No-contact Input Contact Input (Connection to PNP output sensor.) (Connection to NPN output sensor.) Sensor Timer Timer Timer 24 VDC (–) Start Start 24 VDC (–)
  • Page 16 Solid-state Twin Timer H3DS-F Operates in flicker-OFF or flicker-ON start mode with one Unit. Independent ON- and OFF-time settings. Combinations of long ON- or OFF-time and short OFF- or ON-time setting are possible. Long time range from 0.1 s to 12 h for both ON and OFF time settings.
  • Page 17 H3DS-F H3DS-F Specifications General Item H3DS-F Operating mode Flicker-OFF/Flicker-ON start Output type Relay: SPDT External connections Screw terminal, screwless spring terminal Terminal block Screw terminal type: Clamps two 2.5-mm max. bar terminals without sleeves. Screwless spring terminal type: Clamps two 1.5-mm max.
  • Page 18 H3DS-F H3DS-F Characteristics Accuracy of operating 1% max. of FS ( 1% 10 ms max. at 1.2-s range) time Setting error 50 ms max. of FS Influence of voltage 0.5% max. of FS ( 0.5% 10 ms max. at 1.2-s range) Influence of temperature 2% max.
  • Page 19 H3DS-F H3DS-F Nomenclature H3DS-FLj H3DS-FLC Wire connection holes Output ON/OFF indicator When the output is ON: Orange When the output is OFF: Green ON-time setting dial ON-time display window Lock for ON-time setting dial ON-time scale display window and selector (select one from Lock for ON-time scale selector 0.1 s, 1 s, 0.1 m, 1 m, 0.1 h, and 1 h)

  • Page 20: Timing Charts

    H3DS-F H3DS-F I/O Function Inputs Flicker-ON start operation begins when inputs are turned ON. Outputs Control output Outputs are turned ON/OFF according to the time set by the ON-and OFF-time setting dial. Basic Operation Setting of Selector Time Setting The selectors can be turned clockwise and counterclockwise to se- Use the ON/OFF-time setting dials to set the ON/OFF time.
  • Page 21 H3DS-F H3DS-F Dimensions H3DS-FL Surface color: Light gray 5Y7/1 (OMRON) 17.5 H3DS-FLC Surface color: Light gray 5Y7/1 (OMRON) 17.5 Installation Terminal Arrangement H3DS-FLC H3DS-FL (See note 2.) Note: 1. If voltage is applied to terminal B1, or if terminals A1 and B1 are shorted, the operating mode is switched to flicker-ON start mode. If these terminals are disconnected, the mode switches to flicker-OFF start mode.
  • Page 22 Solid-state Star-delta Timer H3DS-G A wide star-time range (up to 120 seconds) and star-delta transfer time range (up to 1 second) Ordering Information Model Operating mode Ope a Supply voltage Supp y o age Screw terminal type Screwless spring terminal type Star-delta operation 24 to 230 VAC (50/60 Hz)/24 to 48 VDC H3DS-GL...
  • Page 23 H3DS-G H3DS-G Specifications General Item H3DS-G Operating mode Star-delta operation Operating/Reset method Time-limit operation/Self-reset External connections Screw terminal, screwless spring terminal Terminal block Screw terminal type: Clamps two 2.5-mm max. bar terminals without sleeves. Screwless spring terminal type: Clamps two 1.5-mm max.
  • Page 24 H3DS-G H3DS-G Characteristics Accuracy of operating 1% max. of FS time Setting error 50 ms max. of FS Total tolerance of transfer (25% FS + 5 ms) max. time Influence of voltage 0.5% max. of FS Influence of temperature 2% max. of FS Insulation resistance 100 MΩ...
  • Page 25 H3DS-G H3DS-G Nomenclature H3DS-GLj H3DS-GLC Wire connection holes Delta operation indicator (orange) Set time window Time setting dial (for setting star operation time) Lock for time setting dial Star-delta transfer time and star operation time scale Lock for star-delta transfer time Release holes display window and selector and star operation time scale...
  • Page 26 H3DS-G H3DS-G I/O Functions Inputs Outputs Control output Star output is turned OFF when the dial set value is reached and delta output is ON after the preset transfer time elapses Basic Operation Setting of Selector Time Setting The selectors can be turned clockwise and counterclockwise to se- The star operation time of the Timer is set with the time setting dial.
  • Page 27 H3DS-G H3DS-G Dimensions H3DS-GL Surface color: Light gray 5Y7/1 (OMRON) 17.5 H3DS-GLC Surface color: Light gray 5Y7/1 (OMRON) 17.5 Installation Terminal Arrangement H3DS-GLC H3DS-GL (see note 1) Note: DC supply voltage does not require the designation of polarity.
  • Page 28 Solid-state Two-wired Timer H3DS-X Covers wide range of supply voltage (24 to 230 VAC/VDC). Ordering Information Model Supply voltage Supp y o age Input type pu ype Operating mode Ope a Screw terminal Screwless spring type terminal type 24 to 230 VAC/VDC (50/60 Hz) No-input available ON-delay H3DS-XL...
  • Page 29 H3DS-X H3DS-X Specifications General Item H3DS-X Operating mode ON-delay Operating/Reset method Time-limit operation/self-resetting Output type SCR output External connections Screw terminal, screwless spring terminal Terminal block Screw terminal type: Clamps two 2.5-mm max. bar terminals without sleeves. Screwless spring terminal type: Clamps two 1.5-mm max.
  • Page 30 H3DS-X H3DS-X Characteristics Accuracy of operating 1% max. of FS ( 1% 10 ms max. at 1.2-s range) time Setting error 50 ms max. of FS Reset time 0.1 s max. Influence of voltage 0.5% max. of FS ( 0.5% 10 ms max. at 1.2-s range) Influence of temperature 2% max.
  • Page 31 H3DS-X H3DS-X Nomenclature H3DS-XLj H3DS-XLC Wire connection holes Set time window Time setting dial (set time) Lock for time setting dial Time scale display window and Release holes selector (select one from 1 s, Lock for time scale selector 0.1 s, 1 h, 0.1 h, 10 h, 1 h, 1 m, and 0.1 m) H3DS-XL Power-ON indicator (green)
  • Page 32 H3DS-X H3DS-X I/O Functions Inputs Outputs Control Outputs are turned ON when the preset value is reached. output Basic Operation Setting of Selector Locking/Unlocking of Selectors and Time Setting Dial The selectors can be turned clockwise and counterclockwise to se- The time setting dial and time scale selector can be locked using the lect the desired time scale, or operating mode.
  • Page 33 H3DS-X H3DS-X Dimensions H3DS-XL Surface color: Light gray 5Y7/1 (OMRON) H3DS-XLC 17.5 Installation Terminal Arrangement H3DS-XLC H3DS-XL Note: DC supply voltage does not require the designation of polarity.

  • Page 34: Applicable Wires

    H3DS-jLC H3DS-jLC Installation of Screwless Spring Terminal Models Tools A flat-blade screwdriver should be used to mount the cables. Applicable Screwdriver Flat-blade, Parallel-tip, 2.5 mm diameter Flat-blade, Parallel-tip 2.5 dia. Flat-blade, Flared-tip Cannot be used. Examples: FACOM AEF.2.5 VESSEL No. 9900-(-)2.5 WAGO 210-119 WIHA 260/2.5 Applicable Wires...
  • Page 35 H3DS-jLC H3DS-jLC Wiring Use wires of the applicable sizes specified above. The length of the exposed conductor should be 6 to 7 mm. 6 to 7 mm Fig. 1 Exposed Conductor Length Use the following wiring procedure. 1. Insert the specified screwdriver into the release hole located beside the wire connection hole where the wire is to be inserted. Wire connection holes...
  • Page 36 H3DS-jLC H3DS-jLC Precautions Always insert the screwdriver straight into the hole, never at an angle. The clamp spring may be deformed if the screwdriver is not straight. Do not move the screwdriver side to side in the clamp hole. The clamp spring may be deformed if the screwdriver is moved sideways.

This manual is also suitable for:

H3ds-aH3ds-mH3ds-s

Table of Contents