Omron Ateg H3DT Series Manual page 26

Datenblatt
Zeitrelais H3DT
H3DT
Power OFF-delay Timer
H3DT-H
• Set two time ranges with each Timer, from 0.1 to 12 seconds
for the S Series and from 1.0 to 120 seconds for the L Series.
Ordering Information
List of Models
Operating modes
Power OFF Delay
Model Structure
Model
H3DT-H
* Certification is pending for DNV GL.
Specifications
Time Ranges
Time range setting
Set time range
Power ON time
Scale numbers
Ratings
Supply voltage
Allowable voltage fluctuation range
Power
consumption
Timer operation starting voltage
Rated Insulation Voltage
Control output
Ambient operating temperature
Storage temperature
Surrounding air operating humidity
Erstellt am 09.10.2020 um 23:38 Uhr | Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten!
|
ATEG Automation GmbH Intzestraße 50
Supply voltage Control output
100 to 120 VAC Contact output: SPDT
200 to 240 VAC Contact output: SPDT
24 to 48 VAC/DC Contact output: SPDT
Terminal block Operating/resetting method
Instantaneous operation/
6 terminals
time-limit reset
S Series
x0.1 x1
0.1 to 1.2 s 1 to 12 s
0.1 s min.
12
H3DT-HCS/-HCL 100 to 120 VAC, 50/60 Hz
H3DT-HDS/-HDL 200 to 240 VAC, 50/60 Hz
H3DT-HBS/-HBL 24 to 48 VAC/DC, 50/60 Hz *1
85% to 110% of rated voltage
H3DT-HCS At 120 VAC: 8.7 VA max.
H3DT-HCL At 120 VAC: 8.8 VA max.
H3DT-HDS At 240 VAC: 21.6 VA max.
H3DT-HDL At 240 VAC: 21.7 VA max.
H3DT-HBS/-HBL At 48 VAC: 1.0 VA max., at 24 VDC: 0.4 W max.
30% or less of power supply voltage
250 VAC
Contact output, 5 A at 250 VAC with resistive load (cos = 1),
5 A at 30 VDC with resistive load
Contact materials : Ag-alloy
(Recommended fuse: BLN5 (Littelfuse) or 0216005MXEP)
20 to 60C (with no icing)
40 to 70C (with no icing)
25% to 85%
|
42859 Remscheid
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
S Series
(time range: 0.1 to 12 s)
H3DT-HCS
Model H3DT-HDS
H3DT-HBS
Output type Mounting method
Relay, SPDT DIN Track mounting
L Series
x1 x10
1 to 12 s 10 to 120 s
0.3 s min.
* DC ripple: 20% max.
| |
Germany Tel.: +49 (0)2191 / 591457-0
*
LR
* CSA conformance evaluation by UL.
H3DT-H
L Series
(time range: 1.0 to 120 s)
H3DT-HCL
H3DT-HDL
H3DT-HBL
Safety standards
cULus
(UL 508 CSA C22.2 No. 14)
CCC
LR
DNV GL *
EN 61812-1
IEC 60664-1 4 kV/2
25
Seite 26 von 37
| | www.ateg.de
info@ateg.de