Omron Ateg H3DT Series Manual page 12

Datenblatt
Zeitrelais H3DT
H3DT
E: Interval (Signal Start)
Power (A1 and A2)
Start input (B1 and A1)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation / Power indicator
G: Signal ON/OFF Delay
Power (A1 and A2)
Start input (B1 and A1)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation / Power indicator
J: One-shot Output (Signal Start)
Power (A1 and A2)
Start input (B1 and A1)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation / Power indicator
J2: One-shot Output (Power ON Start)
Power (A1 and A2)
Time-limit contacts: NC
15 and 16 (25 and 26)
Time-limit contacts: NO
(output indicator)
15 and 18 (25 and 28)
Instantaneous contacts: NC
(21 and 22)
Instantaneous contacts: NO
(21 and 24)
Operation / Power indicator
Note: 1. The reset time is 0.1 s min. Make sure the signal input time is 0.05 s or longer.
2. "t" is the set time. "ta" is a time that is less that the set time.
Erstellt am 09.10.2020 um 23:38 Uhr | Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten!
|
ATEG Automation GmbH Intzestraße 50
t t t − a t − a
t t t t a t
−
t t t − a t − a
1 s±0.6 s (fixed) 1 s±0.6 s (fixed)
t a
−
t
1 s±0.6 s (fixed)
| |
42859 Remscheid Germany
Basic Operation
t t − a
Power
Start input
Output
* The start input is valid while the Timer is in operation.
Basic Operation
t a
−
Power
Start input
Timing
Output
* The start input is valid while the Timer is in operation.
Basic Operation
t t − a
Power
Start input
1 s±0.6 s (fixed)
Output
* The start input is valid while the Timer is in operation.
Basic Operation
t
Power
1 s±0.6 s (fixed)
Output
|
Tel.: +49 (0)2191 / 591457-0
H3DT-N/H3DT-L
Timing
Timing Timing Timing
1 s±0.6 s
Timing
(fixed)
Timing 1 s±0.6 s
(fixed)
11
Seite 12 von 37
| | www.ateg.de
info@ateg.de