Cut Print (P-300E/P-150E) - Olympus CAMEDIA C-21 Instructions Manual

2 3
LCD Monitor
Écran ACL
LCD-Monitor
176
1
2
E

CUT PRINT (P-300E/P-150E)

You can make 4/16-cut prints using the P-300E/P-150E printer.
• In order to make sticker prints, the specialty paper must be set in
the P-300E/P-150E printer's paper feeder.
1
Connect the camera to the printer, then turn on the LCD
monitor and display the picture you want to print.
• See page 166 for connection to the printer.
2
Press the OK button, then press the bottom arrow on the
Jog dial to select
3
Press the right/left arrows on the Jog dial to select
(4-cut print) or (16-cut print).
• Press the LCD monitor ON/OFF button to cancel Cut print and
the Menu.
4
Enter the number of copies to be printed on the printer
(P-300E only), then press the DIRECT PRINT button to
start printing.
Note:
• The adjustment will be canceled when the Menu mode is
canceled.
• Date print is not available in the 4/16-cut print modes.
• Since the file size is reduced to make cut prints, the image
quality may be affected.
.