Iso - Olympus CAMEDIA C-21 Instructions Manual

1 2
LCD Monitor
Écran ACL
LCD-Monitor
Control panel
Écran de commande
LCD-Feld
140
1
E

ISO

You can select the sensitivity.
1
In the Record mode, turn on the LCD monitor and press
the OK button. Press the bottom arrow on the Jog dial to
select
2
Press the right arrow on the Jog dial to select AUTO, 200
or 400.
• ISO appears on the control panel when a setting other than
AUTO is selected.
• The higher the ISO, the faster the shutter speed that can be
used and the lower the amount of light required.
• Press the OK button again to cancel the Menu. When the Menu
is canceled with a setting other than AUTO selected, the setting
will remain and appear on the LCD monitor.
3
Take a picture.
Note:
• The setting will remain even after a picture is taken, but will
return to AUTO when the lens barrier is closed.
• Pictures will appear grainy when the ISO is high.
• When AUTO is selected, the ISO is automatically set high in
low-light situations when the flash is not used, to prevent
blurring from camera movement.
• The sensitivity scale is based on the one used for picture film,
but the numbers are for reference only.
.