Disconnecting/Connecting The Cmpj+ Joysticks; Connecting The Cmpj+ Joysticks; Disconnecting The Cmpj+ Joysticks - Invacare TDX SP User Manual

1. Hold the light grey collar portion A of the joystick connector B
with one hand and the controller connector C on the wheelchair
in the other and align them.
2. Lightly push to engage the joystick connector and the controller
connector.
8.18 Disconnecting/Connecting the CMPJ+
Joysticks
The joystick connector is located at the rear of the seat
frame.

8.18.1 Connecting the CMPJ+ Joysticks

Ensure the gaskets B are installed in the top connector cap
and between network connectors C.
1143190-N-03
1. Ensure the latch is pulled away from the network connector.
2. Connect the network connector to the other connectors.
3. Top D and Bottom E Connectors - Install connector caps onto
the network connector.
4. Push the latch in to secure the network connectors and caps.
5. If necessary secure excess cable using tie-wraps.

8.18.2 Disconnecting the CMPJ+ Joysticks

Pull the latch A away from the joystick connector.
1.
2. Disconnect the joystick connector from the remaining
connectors.
Setup and Maintenance
73