Invacare TDX SP User Manual page 42

Invacare® TDX® SP
User Settings
Set Date and Time
Fault Codes
42
Battery Voltage
Connected Devices
User Settings
SET DATE AND TIME - Sets the clock on the
Set Date
and Time CMPJ+ joystick. Adds date and time stamp to
error codes.
•
Move the joystick Up or Down to change
the highlighted value (hour, minute, AM/PM,
month, day, year)
•
Move the joystick Right or Left to select a
value or the Set icon.
•
Highlight the Set icon and move the joystick
forward to enter new date and time.
Battery BATTERY VOLTAGE - Displays current battery
Voltage voltage. This is a diagnostic test a user can
perform prior to a service call.
Fault Code FAULT CODES - Displays time and date stamped
fault codes. This information can be helpful to a
provider prior to making a service call.
CONNECTED DEVICES - Displays device
Connected
connections.
Devices
Connected Devices Screen
This screen is displayed if the Mode Select switch is held active for
about 10 seconds. This screen shows an icon that represents any
additional devices that are connected to the chair
1143190-N-03