Mains Electricity Connection - CDA HG9321SS Installation, Use And Maintenance Manual

Built-in cooking hob
Table of Contents

Advertisement

Mains Electricity Connection

Incorrect installation may be dangerous and the manufacturer can not be held responsible.
Warning! This appliance must be earthed The manufacturer declines all responsibility for
any problem caused by failure to observe this rule.
THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING
FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSE SPUR OUTLET AND PROTECTED BY A 3A FUSE.
We recommend that the appliance is connected by a qualified electrician, who is a member of the
N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.
The wires in the mains lead of this appliance are coloured in accordance with the following code:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
As the colours of the wires in the mains lead for the
appliance may not correspond with the coloured
markings identifying the terminals connecting to the
fuse spur, proceed as follows:
The wire which is coloured green and yellow must
be connected to the terminal marked E (Earth) or
coloured green.
The wire which is coloured blue must be connected
to the terminal marked N (Neutral), or coloured
black.
The wire which is coloured brown must be connected
to the terminal marked L (Live), or coloured red.
Note: Use a 3A Fuse
Assembly and electrical connection should be carried out by specialised personnel.
When installing this product we recommend you seek the help of another individual.
DOUBLE POLE SWITCHED
FUSE SPUR OUTLET
FUSE
ON
USE A 3 AMP FUSE
Fig. 11
17

Advertisement

Table of Contents
loading

Table of Contents