System Inclusion / Exclusion; Steps Of Adding The Device (Device Inclusion) - Johnson Controls KONOzw Operation Manualline

Product Model: KONOzw
6. S
YSTEM
INCLUSION
During the initial setup, you will be prompted to pair the device with your home control system. If you choose
not to pair during the initial setup process, you can manually initiate the
following these steps:

6.1 Steps of Adding the Device (Device Inclusion)

• Initiate inclusion
In HOME screen, press the knob once to enter the menu settings
•
• Rotate the knob to select
In the inclusion/exclusion
•
Start the device adding process
• The device will begin the adding process – you will see this screen:
Step 1: Device prepares to add to the hub:
Operation Guideline
on your home control system using the instructions provided with it
, then press the knob to enter the
menu, select ADD and press the knob to confirm
Copyright  Johnson Controls Inc 2019 All Rights Reserved
inclusion
inclusion/exclusion
Turn off the radio
Page 5 of 19
process at any time by
menu