Steps Of Removing Device (Device Exclusion) - Johnson Controls KONOzw Operation Manualline

Product Model: KONOzw

6.2 Steps of Removing Device (Device Exclusion)

• In HOME screen, press the knob once to enter the menu settings
• Rotate the knob to select
In the inclusion/exclusion
•
Start the device adding process
The device will begin the removal process – you will see this screen:
•
Step 1: Device prepares to be removed from the hub:
Step 2: At the hub portal, click "Remove device".
Step 3: Device is removed from the hub successfully.
Operation Guideline
, then press the knob to enter the
menu, select RST and press the knob to confirm
Copyright  Johnson Controls Inc 2019 All Rights Reserved
Page 7 of 19
inclusion/exclusion
Skip the device removal and keep the RF radio to
be on.
menu