Product Model: KONOzw
When the screen show 'iS', rotate the knob clockwise to select YES and press to confirm
•
•
The first screen will show the system type information. Rotate the knob clockwise to show the Host
firmware version. Rotate the knob clockwise again to show the Z-Wave firmware version.
Example screens:
7.
I
NSTALLATION
Switch power off at circuit breaker to both heating and cooling systems before performing any wiring
•
•
Remove front of existing thermostat from base
•
Photograph current wiring for reference
•
Release wires and mounting screws and remove base from wall
Open KONOzw from base and pull wires through
•
•
Secure KONOzw base to wall (mounting hardware and optional wall plate included)
•
Referencing your wiring photo, attach your thermostat wires to the KONOzw using your original wiring
letters and the following terminal reference as a guide based upon your system type.
Operation Guideline
Host firmware version
Copyright Johnson Controls Inc 2019 All Rights Reserved
Page 13 of 19
Z-Wave firmware version