Setting General Button Properties - AMX MIO-R4 Operation/Reference Manual

Working With Buttons

Setting General Button Properties

Once you have created a new button, you can use the General tab of the Properties Control window
(FIG. 40) to set/edit general (non-state oriented) button properties. The General tab contains a table that
lists the button properties for the selected button type.
FIG. 40 General tab of the Properties Control window
To edit any of the listed button properties, click on an item in the right-hand column to activate the field.
Depending on the item selected, you can either set the item manually, select from a drop-down menu, or
both.
See the General Properties section on page 113 for a description of supported properties (some
properties only apply to certain button types, as indicated in the descriptions).
TPDesign4 Touch Panel Design Software (v2.10 or higher) 65