Table of Contents
Advertisement
i!-ConnectLinx Touch Panel Button Mappings Page
The i!-ConnectLinx Touch Panel Button Mappings page is available if you selected Support pre-meeting
presets? or Monitor source usage? on the Room Information/Options page. You can map touch panel buttons
to i!-ConnectLinx. Otherwise, only power on/off and source selects are available.
The i!-ConnectLinx functions grid list displays all i!-ConnectLinx functions, with touch panel button
mappings, currently available in the project. The column on the left contains a checkbox where the check
indicates the function is mapped. Removing the check clears the mapping.
FIG. 21
i!-ConnectLinx Touch Panel Button Mappings page
i!-ConnectLinx Touch Panel Button Mappings Page
Category:
Functions:
Named Devices:
Show All Devices: A check box that displays all devices in the Named Devices list when checked.
Button:
Add:
Remove:
RMS CodeCrafter
A list of i!-ConnectLinx function categories.
The Functions list populates corresponding to your selection in this list.
A list of i!-ConnectLinx functions for the selected category.
A list of devices populated by what is defined in the Add/Edit Named Devices
dialog section on page 25.
This field only contains devices that have been previously defined.
If unchecked, only the Named Devices display in the list.
A numeric field for the button number.
Adds an entry to the device list. Once you click add you are prompted with a confirmation
window. The window contains the current function number and name.
The window provides a box to select the touch panel device and a numeric field for the
button number, but if the device and button fields are populated, RMS CodeCrafter will
attempt to add the mapping without offering the dialog.
In the event the mapping already exists, the mapping will fail and you receive a
notification. To re-map, the original must be removed from the device list.
Removes the device currently selected in the device list.
RMS CodeCrafter Project Pages
33
Advertisement
Table of Contents
