Setting Project Properties; Project Properties Dialog - Project Information Tab - AMX MIO-R4 Operation/Reference Manual

TPDesign4 Project Files

Setting Project Properties

Select File > Project Properties to open the Project Properties dialog. This is a multi-tab dialog
allowing you to view and edit the target touch panel's properties. Depending upon the panel selected,
each panel will support all or part of the following properties at the panel level:

Project Properties dialog - Project Information tab

Use the options in the Project Information tab of the Project Properties dialog (FIG. 21) to view/edit file
information associated with the active project file. The information in this tab was set up when the
project was created, in the New Project Wizard. These items represent the various components of the
System-Generated File Name.
FIG. 21
Project Properties dialog - Project Information tab
If the Use System-Generated File Names option was not selected in the New Project Wizard, these fields
will be blank.
The options in this tab include:
22
Project Information tab: Includes basic project information, the Use system generated
filenames option and Protection options with Password fields. See the Project Properties
dialog - Project Information tab section on page 22 for details.
Panel Setup Information tab: Includes touch panel setup options including Refresh
Frequency, Marquee Speed, Panel Strings (Startup, Wakeup and Sleep), Power-up and
Inactivity Settings and Feedback Blink Rate. See the Project Properties dialog - Panel Setup
Information tab section on page 24 for details.
Sensors tab: Includes Channel/Level and Port settings for Light Sensors, Motion Sensors,
Battery Levels and Cradle Sensors. See the Project Properties dialog - Sensors tab section on
page 27 for details.
IR Emitters and Receivers tab: Includes Channel Port information for AMX IR Emitters,
AMX IR Receivers and User (non-AMX) IR Emitters. See the Project Properties dialog - IR
Emitters and Receivers tab section on page 28 for details.
TPDesign4 Touch Panel Design Software (v2.10 or higher)