Running The G4Cc Application - AMX MIO-R4 Operation/Reference Manual

Appendix A: G4 Computer Control

Running the G4CC Application

Once the configuration file has been created:
Double-click to launch the amxCC.exe application located in the root directory of the USB Control
Stick to begin your G4CC session.
Upon opening this file, your PC should now be displayed on the touch panel.
To terminate your Computer Control session, right click on the tool try icon and select Close Computer
Control from the menu.
232
The G4CC icon will appear in the tool tray.
The icon will turn green when a Modero / TPI/4 panel is connected to the computer.
TPDesign4 Touch Panel Design Software (v2.10 or higher)