Output Specifications; Relay Output Specifications - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition
4.4

Output Specifications

The output specifications for the main unit are explained below.
4.4.1

Relay output specifications

Item
Number of output points
Output connecting type
Output form
External power supply
Max. load
Min. load
Open circuit leakage current
Response time
Output circuit insulation
Output operation display
Output circuit configuration
32
FX -10MR
3S
4 points
240 V AC or less (250 V AC or less when the unit does not comply with CE, UL or cUL standards.)
The total load current of resistance loads per common terminal should be the following value.
Resistance load
• 1 output point/common terminal: 2 A or less
• 4 output points/common terminal: 8 A or less
Inductive load
OFF→ON
ON→OFF
4 Specifications, External Dimensions and Terminal Layout (Main Units)
Relay output specification
FX -14MR
3S
6 points
Fixed terminal block (M3 screw)
30 V DC or less,
2 A/point
→ For details on the common terminal for each model, refer to the Section 4.7.
80 VA (UL and cUL standards approved at 120 and 240 V AC.)
→ For the product life, refer to Subsection 14.4.2.
→ For cautions on external wiring, refer to Subsection 12.1.3.
5 V DC, 2 mA (reference value)
Approx. 10 ms
Mechanical insulation
LED on panel lights when power is applied to relay coil.
Load
Y
DC power
supply
COM
Fuse
Load
Y
AC power
supply
COM
Fuse
A common number applies to the
4.4 Output Specifications
FX -20MR
3S
8 points
Relay
-
of [COM ].
FX -30MR
3S
14 points