Requirement For Compliance With Lvd Directive - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition
Type: Programmable Controller (Open Type Equipment)
Models: MELSEC FX
from June 1st, 2005
from April 1st, 2007
from December 1st, 2007
from November 1st, 2008
from June 1st, 2009
from February 1st, 2012
from March 1st, 2013
from September 1st, 2013
from September 1st, 2014
EN61131-2: 2007

Requirement for Compliance with LVD directive

The following products have shown compliance through direct testing (of the identified standards below) and
design analysis (through the creation of a technical construction file) to the European Directive for Low
Voltage (2014/35/EU) when used as directed by the appropriate documentation.
Type: Programmable Controller (Open Type Equipment)
Models: MELSEC FX
from March 1st, 2013
from September 1st, 2013
For the products above,
PLCs manufactured before April 30th, 2018 are compliant with EN61131-2: 2007,
PLCs manufactured after May 1st, 2018 are compliant with EN61131-2: 2007 and EN61010-2-201: 2013.
*1. For some models, PLCs manufactured in March, 2018 are compliant with LVD directive successively.
EN61131-2: 2007 Programmable controllers
EN61010-2-201: 2013 Safety of electrical equipment for
series, FX series, FX
3S 3G
FX -232ADP
3U
FX 3U -4AD-ADP
FX -232ADP-MB
3U
FX -4AD-PTW-ADP
3U
FX 3G -232-BD
FX -EEPROM-32L
3G
FX -2AD-BD
3G
FX -3A-ADP
3U
FX -ENET-ADP
3U
FX -MR/ES
3S
Where  indicates:10, 14, 20, 30
FX -CNV-ADP
3S
FX -MR/DS
3S
Where  indicates:10, 14, 20, 30
FX -30MR/ES-2AD
3S
FX -4EX-BD
3G
FX -5DM
3S
Standard
Programmable controllers
- Equipment requirements and tests
series manufactured
3S
FX -MR/ES
3S
Where  indicates:10, 14, 20, 30
FX -MR/DS
3S
Where  indicates:10, 14, 20, 30
FX -30MR/ES-2AD
3S
Standard
- Equipment requirements and tests
measurement, control, and test
series manufactured
3U
FX -485ADP
3U
FX 3U -4DA-ADP FX 3U
FX -485ADP-MB
3U
FX -4AD-PNK-ADP
3U
FX 3G -422-BD FX 3G
FX -1DA-BD FX
3G 3G
FX -MT/ES FX
3S 3S
FX -MT/DS FX
3S 3S
FX -30MT/ES-2AD FX
3S 3S
FX -2EYT-BD FX
3G 3G
Compliance with all relevant aspects of the standard.
EMI
• Radiated Emission
• Conducted Emission
EMS
• Radiated electromagnetic field
• Fast transient burst
• Electrostatic discharge
• High-energy surge
• Voltage drops and interruptions
• Conducted RF
• Power frequency magnetic field
FX -MT/ES FX
3S 3S
FX -30MT/ES-2AD FX
3S 3S
The equipment has been assessed as a component for fitting in a suitable
control box which meets the requirements of EN61131-2: 2007
The equipment has been assessed as a component for fitting in a suitable
control box which meets the requirements of EN61010-2-201: 2013
-4AD-PT-ADP FX 3U -4AD-TC-ADP
-485-BD
-8AV-BD
-MT/ESS
-MT/DSS
-30MT/ESS-2AD
-485-BD-RJ
Remark
-MT/ESS
-30MT/ESS-2AD
Remark
Standards
*1
11