When "Timer (T)" Is Selected - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition

16.5.4 When "Timer (T)" is selected

Monitoring and testing can be performed for the timer (T).
1. Description of display
[1] Displayed device
[2] Displayed device No.
[3]
Hexadecimal
[4]
ON/OFF status
[5]
Reset
[6] Current value
[7] Setting value
*1. Displayed when a hexadecimal is specified.
*2. Displayed while timer (T) is ON.
*3. Displayed while timer (T) is reset.
2. Monitor mode operation
Press the [+] or [-] buttons to change the device to monitor.
Timer (T) that is not used in the program is not displayed.
To return to the device selection screen, press [ESC] button.
A horizontal line "-" is displayed if there is no timer (T) in the program.
160
Display Content
*1
*2
*3
16 Display Module (FX3S-5DM)
[1] [2] [3] [4] [5]
Example when T0 and T10
are used in the program
[+]
Example when "Timer (T)"
is not used in the program
16.5 Monitor/Test
[6]
[7]
[-]