When "Counter (C)" Is Selected - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition

16.5.5 When "Counter (C)" is selected

Monitoring and testing can be performed for the counter (C).
1. Description of display
[1] Displayed device
[2] Displayed device No.
[3]
Hexadecimal
[4]
ON/OFF status
*3
[5]
Reset
[6] 32-bit
[7] Current value
[8]
Setting value
*1. Displayed when hexadecimal is specified.
*2. Displayed while counter (C) is ON.
*3. Displayed while counter (C) is reset.
*4. "S" is displayed when a setting value is displayed.
*5. In the case of 32-bit counter (C), upper 5 digits are displayed in
upper row and the lower 5 digits are displayed in lower row.
2. Monitor mode operation
Press the [+] or [-] buttons to change the device to monitor.
Counter (C) that is not used in the program is not displayed.
To return to the device selection screen, press [ESC] button.
Example when C10, C20, C235 and C240 are used in the program
Current value/Setting value of C10
Setting value of C240
A horizontal line "-" is displayed if there is no counter (C) in the program.
162
Display Content
*1
*2
*4*5
Current value/Setting value of C20
[+]
[-]
Current value of C240
[-]
[+]
Counter (C) 16-bit
[1] [2] [3] [4] [5]
[6]
[7]
[8]
[+]
[-]
[-]
[+]
16 Display Module (FX3S-5DM)
16.5 Monitor/Test
Counter (C) 32-bit Counter (C) 32-bit
[8] [8]
Current value of C235
[-] [+]
Setting value of C235
Example when "Counter (C)"
is not used
[7] [7]
Upper
Lower