American Dynamics Excalibur SE Installation & Setup Instructions Manual page 20

EXCALIBUR SE SYSTEM SETUP
Sound Files Menu
The Excalibur SE program can use a Windows-compatible
sound card to annunciate operator actions. Button sounds are
played when the operator presses an icon or button during
operation of the Excalibur SE program.
The "Sound Files" item of the System Setup window menu bar
provides two selections: Alarm Sound and Button Sound. The
Alarm Sound item cannot be selected from the Excalibur SE
version.
When the Button Sound entry is selected, a Select Button
Sound File dialog box is displayed, as illustrated below. The
dialog box allows selection of a directory and a sound file
(.WAV file) from that directory. Note that sound files may be
in any accessible directory.
To choose a default sound, first locate and select the desired
directory name from the right-hand list box. The selected
directory is shown in the "Dir:" field above this list box. The
sound files available in that directory are displayed in the left-
hand list box.
Next, select the sound (.WAV) file desired from the right-hand
list box. When the desired sound file is selected, the file name
is displayed in the "File:" box above the list box. Select the
"OK" button to save the data and close the dialog box.
Select "Cancel" to exit from the dialog box without saving the
selected information.
Note: If no sound card is installed in the PC, the speaker will
beep when the button is pressed. IF NO SOUND CARD IS
INSTALLED IN YOUR PC, DO NOT SELECT ANY
SOUND FILES OR THE SPEAKER WILL NOT BEEP.
EXITING EXCALIBUR SE SYSTEM SETUP
After the desired setup information has been entered via the
System Setup functions, select "Exit" from the System Setup
window menu bar to exit the program. Alternately, use the
Windows Control button to Close the program.
All of the setup information need not be entered at one time,
but all must be entered before the Excalibur SE program can
be started. The Directory, Ports, and Maps setup functions
must be completed before the Excalibur SE Icons Setup
program can be operated (see Initial Startup Note, page 1-5).
2-8