American Dynamics Excalibur SE Installation & Setup Instructions Manual page 17

Port Setup Changes
The parameters saved for AD Switcher port is stored in the
EXCALIBR.INI file, in the Windows directory. After initial
setup of a port, the setup can be changed using the above Set
Ports function.
To change an existing port setup, select the appropriate AD
switcher and keyboard number from the Set Ports/Modules
dialog box, page 2-4, and follow the above procedures as for a
new port setup.
Note: When all port setup parameters have been saved, do not
change the settings unless a corresponding change is made
in the Matrix Switcher connected to the port.
EXCALIBUR SE SYSTEM SETUP
2-5