Installing Or Replacing Msam Cards - VeriFone V200c Installation Manual

CAUTION
NOTE
Installing or
Replacing MSAM
Cards
CAUTION
NOTE
Installing or replacing
MSAMs
7
Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door (see
To prevent the paper roll cover from damaging the print roller, always gently
press down on the printer dust cover to close it.
Figure 8 Closing Paper Roll Cover
8
Tear the paper off against the serrated strip.
For paper ordering information, refer to
When you first receive your terminal, you may need to install one or more MSAM
cards or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. Verifone recommends
using a grounded anti-static wrist strap.
Verifone ships variants of the V200c and V400c terminals for different markets.
Your terminal may have different features described in this section.
1
Remove the power pack from the power outlet.
2
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
Figure 8).
Accessories and

Installing or Replacing MSAM Cards

Documentation.
V200 V400 I
C AND C NSTALLATION
S
ETUP
21
G
UIDE