Unpacking Shipping Carton; Msam/Usd Cards; Opening Card Compartment - VeriFone V240m Installation Manual

Unpacking
Shipping Carton
CAUTION
WARNING
MSAM/uSD
Cards
CAUTION
Opening Card
Compartment
Carefully inspect the shipping carton and its contents for possible tampering or
damage.
1
Remove the V240m unit from the shipping carton. The standard package
contains the PIN pad, power pack, battery, and printer paper roll. Refer
Accessories and Documentation
accessories.
This device is a secure product and any tampering can cause it to cease to
function or operate in an unsecured manner.
2
Remove any protective plastic wrap and place the unit on a table or
countertop.
3
Remove the clear protective film from the display.
4
Replace all the packing materials, close the lid, and save the carton for
repacking or moving the V240m unit or base in the future.
Do not use a unit that has been tampered with or otherwise damaged. This unit
comes equipped with tamper-evident label. If a label or component appears
damaged, immediately notify the shipping company and your Verifone
representative or service provider.
You may need to install or replace the multiple security access module (MSAM),
Micro Secure Digital (SD) and Subscriber Identity Module (SIM) cards.
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.
Use the following steps to get access to the MSAM, SD and SIM card
compartment:
1
Place the terminal face down on a soft and clean surface to protect the display
from scratches.
2
Push down the locking tab and swing out the compartment cover.
to for more information about V240m related
V240
S
ETUP

Unpacking Shipping Carton

I G
M NSTALLATION UIDE
13