Installing/Replacing Msam Cards - VeriFone VX 520-G Installation Manual

T S
ERMINAL ETUP

Installing/Replacing MSAM Cards

Installing/
Replacing MSAM
Cards
CAUTION
To install or replace
MSAMs
22
VX 520-G I
NSTALLATION
When you first receive your VX 520-G terminal, you may need to install one or
more MSAM cards or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Remove the power cord from the power outlet.
2
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
3
Press the unlocking button and then lift the rear cover to access the MSAM
cardholder panel.
Figure 11 Opening VX 520-G Rear Cover
4
Hold the MSAM cardholder panel, grasp firmly and pull upward to expose the
MSAM slots.
Figure 12 Removing VX 520-G MSAM Cover
5
Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
G
UIDE