Environmental Factors; Electrical Considerations; Pin Protection Measures - VeriFone V200c Installation Manual

S
ETUP
Selecting Unit Location
Environmental
Factors
CAUTION
Electrical
Considerations
PIN Protection
Measures
12
V200 V400 I
C AND C
•
The unit must be used in an attended environment.
•
Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
•
Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or motor.
•
Do not use the terminal outdoors.
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.
•
Avoid using terminals during electrical storms.
•
Place the unit 10 cm away from metallic objects to avoid interference with the
CTLS field.
•
Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
•
Do not use the terminal near water or in moist conditions.
Several techniques can be employed to provide for effective screening of the PIN
entry keypad during the PIN entry process. These methods would typically be
used in combination, though in some cases a method might be used singly.
•
Position V200c and V400c terminals on the check-stand in such a way as to
make visual observation of the PIN entry process infeasible. Examples here
include:
•
Visual shields designed into the check-stand. These shields may be solely
for shielding purposes, or may be part of the general check-stand design.
•
Position the V200c and V400c so that it is angled in such a way that PIN
spying is difficult.
•
Install V200c and V400c terminals on adjustable stands that allow consumers
to swivel the terminals sideways and/or tilt forwards/backwards to a position
that makes visual observation of the PIN entry process difficult.
•
Position in-store security cameras so that the PIN entry keypad is not visible.
•
Install the optional privacy shield (see
G
NSTALLATION UIDE
Installing Privacy Shield).