Verifying Proper Operation; Led Indicators; Table 3-7: Su-Ra-2.4 Leds - Alvarion BreezeACCESS II CX System Manual

Verifying Proper Operation

The following sections describe how to verify the correct functioning of
the various unit, Ethernet connections and data connectivity.

LED Indicators

To verify the correct operation of the units, examine the LED indicato
located on the bottom panel of the Radio Units.
The following tables list the provided LEDs and their associated
indications.
Name Description
ETH Ethernet activity
indication
WLNK Wireless Link
Activity Indictor
ALARM Alarm Indication
Name Description
ETH Ethernet activity
indication
12V IN 12 VDC Power
Supply Indication
ALARM Alarm Indication
Manual Revision 1.0

Table 3-7: SU-RA-2.4 LEDs

Functionality
Off – No traffic activity detected on the Ethernet port
Blinking – Data received from or transmitted to the
Ethernet port
Blinking – Packets received from the wireless link
Off – No reception of packets from the wireless link
On – A problem with the power amplifier or in the locking
process of any of the synthesizers
Off – Normal operation
Table 3-8: AU-RE-2.4, AU-RE-900 LEDs
Functionality
Off – No traffic activity detected on the Ethernet port
Blinking – Data received from or transmitted to the
Ethernet port
On –12 VDC power is supplied to the unit
Off – 12 VDC power is not available
On – A problem with the power amplifier or in the locking
process of any of the synthesizers
Off – Normal operation
Verifying Proper Operation
rs
3-17