Table 1-1: Cell Extender Models -Product Families/Bands; Table 1-2: Cell Extender Models -Radio Units - Alvarion BreezeACCESS II CX System Manual

Table 1-1: Cell Extender Models –Product Families/Bands
Model SU's outdoor unit
CX-BA2.4-BA2.4 BreezeACCESS II/2.4 GHz
CX-BA2.4-BA900 BreezeACCESS II/2.4 GHz
CX-VLA.B*-BA2.4 BreezeACCESS VL/A.B* GHz
CX-VLA.B* -BA900 BreezeACCESS VL/A.B* GHz
* A.B is the radio band of the BreezeACCESS VL unit. BreezeACCESS VL products
are currently available in the 5.8 GHz band.
NOTE
The mechanical structure of current Interface Units of CX-BA2.4-BA2.4 and
CX-BA2.4-BA900 is slightly different from the mechanical structure of Interface Units of
other Cell Extenders as described throughout the manual. Refer to Appendix C for more
details on the applicable differences.
Table 1-2: Cell Extender Models –Radio Units
Model
CX-BA2.4-BA2.4
CX-BA2.4-BA900
CX-VLA.B*-BA2.4
CX-VLA.B*-BA900
* A.B is the radio band of the BreezeACCESS VL unit. BreezeACCESS
VL products are currently available in the 5.8 GHz band.
The Interface Unit is connected to radio units operating in the 2.4 GHz
or 900 MHz band via a TNC connector and 50 ohm coaxial Intermediate
Frequency (IF) cable. This cable carries 440 MHz IF signals between the
Interface Unit and the radio unit. In addition, this cable transfers power
(12 VDC) and control signals from the Interface Unit to the radio units.
Manual Revision 1.0
Applicable to CX-BA2.4-BA2.4 and CX-BA2.4-BA900
SU's outdoor unit
SU-RA-2.4
SU-RA-2.4
SU-A-A.B*-ODU
SU-A-A.B*-ODU
Introducing the Cell Extender
AU's outdoor unit
BreezeACCESS II/2.4 GHz
BreezeACCESS 900/900 MHz
BreezeACCESS II/2.4 GHz
BreezeACCESS 900/900 MHz
AU's outdoor unit
AU-RE-2.4
AU-RE-900
AU-RE-2.4
AU-RE-900
1-3