Table of Contents
Advertisement
Chapter 2 - Installation
Installing the Radio Units
The following sections describe how to install the Radio Units, including
pole mounting the units, and connecting the necessary cables.
Pole Mounting the Radio Unit
The Radio Unit can be mounted on a pole using one of the following
options:
Special brackets and open-ended bolts are supplied with each unit.
There are two pairs of threaded holes on the back of the unit,
enabling the special brackets to be mounted on diverse pole widths.
Special grooves on the sides of the unit enable the use of metal
bands to secure the unit to a pole. The bands must be 9/16 inches
wide and at least 12 inches long. The metal bands are not included
with the installation package.
Figure 2-1 shows the locations of the holes and band grooves on the
back, top and bottom of the Outdoor Unit.
NOTE
Be sure to install the unit with the bottom panel, which includes the LED indicators,
facing downward.
2-8
Figure 2-1: Threaded Holes/Grooves
Cell Extender System Manual
Advertisement
Table of Contents
